Ara Mateix by Jam
Oscillator 1 timbre
Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is manually set to 74.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to -1.
Noise timbre
Noise level is set to 0 and is modulated by LFO 2.
LFO 2 mod-matrix 2 modulation amount for Noise level is 15.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 259.87Hz (142).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 477.06Hz (96) and is modulated by Note Vel, LFO 1, VCF Env.
LFO 1 direct modulation amount for low-pass filter cut-off frequency is 166. LFO 1 mod-matrix 1 modulation amount for low-pass filter cut-off frequency is 25.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 114.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±9 cents (48).
Oscillators drift level is off.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 78. Effect 2 level is manually set to 72. Effect 3 level is manually set to 73. Effect 4 level is manually set to 80.
Gated Reverb fx
not yet complete
Delay fx
not yet complete
Multi-Band Distortion fx
not yet complete
Phase fx
not yet complete
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 114 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls VCF Cut-off Frequency, VCA Envelope Trigger Mode.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 166 |
| volume | env-trigger | VCA Envelope Trigger Mode | |
| timbre | matrix | VCF Cut-off Frequency | 25 |
| name | value |
|---|---|
| LFO 1 Rate | 0.13Hz (40) |
| LFO 1 Delay / Fade | 0.98s (38) |
| LFO 1 Shape | Ramp Down |
| LFO 1 Key Sync | on |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 182 |
LFO 2 modulator
Controls Noise Level.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | Noise Level | 15 |
| name | value |
|---|---|
| LFO 2 Rate | 6.66Hz (176) |
| LFO 2 Delay / Fade | 3.21s (124) |
| LFO 2 Shape | Square |
| LFO 2 Key Sync | on |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 255 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 12.78s (201) |
| VCA Envelope Decay Time | 1.04s (122) |
| VCA Envelope Sustain Level | 67% (172) |
| VCA Envelope Release Time | 1.63s (162) |
| VCA Envelope Trigger Mode | LFO 1 (1) |
| VCA Envelope Attack Curve | 73 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 68 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 114 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.13s (128) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 0s (0) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |